38
4. Quick Reference Guide
This Quick Reference Guide is for reference only. Please read the
entire manual before using the unit for the first time.
To help ensure a reliable reading, avoid eating, smoking, or
exercising for at least 30 minutes before taking a measurement.
Note: Remove any tight-fitting clothing from your upper arm.
1. Sit on a chair with your feet flat on the floor and place your
arm on a table so that the arm cuff will be at the same
level as your heart.
2. Secure the cuff around your arm using the fabric fastener
strip.
3. Select your user ID (A or B).
4. Press the START/STOP button.
When measurement is complete,
the unit displays your blood
pressure and pulse rate, and
automatically deflates the cuff.
Note: Please note that all
measurement results are
stored in the memory. If different people take
measurements using the same device, make sure
that you are aware of this fact.
HEM-7080-C1_B_M.fm Page 38 Tuesday, March 9, 2010 9:05 AM
To Next Page
Loading...
