19
2. Preparation
2.1 Installing Batteries
1. Push down on the hook of the
battery cover and pull upward.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment.
3. Close the battery cover.
As soon as batteries are correctly installed, the year
flashes on the display.
Refer to sub-section 2.2 to set the date and time
manually, or refer to sub-section 4.1 to pair your
monitor to set the date and time automatically.
•When the “ ” symbol flashes on the display, it is recommended you
replace batteries.
•To replace batteries, turn your monitor off and remove all batteries. Then
replace with 4 new batteries at the same time.
•Replacing batteries will not delete previous readings.
•The supplied batteries may have a shorter life span than new batteries.
•Disposal of used batteries should be carried out in accordance with local
regulations.
To Next Page
Loading...
