20
2.2 Setting the Date and Time
•Set your monitor to the correct date and time before taking a
measurement for the first time.
•The date and time will automatically be set when the monitor is paired
with “OMRON connect US/CAN” app. Refer to sub-section 4.1.
•As soon as batteries are correctly installed, the year flashes on the
display of your monitor.
1. If nothing is displayed, press the button to display the year.
If the year is already displayed, skip this step.
2. Press the or button to adjust the year.
Press and hold the button to quickly advance the years.
Press and hold the button to quickly go backwards through the
years.
3. Press the button to
confirm the year, then the
month will flash. Repeat
the same steps to adjust
the month, day, hour, and
minute.
To Next Page
Loading...
