29
5. Press the [START/STOP] button to turn your monitor off.
•If the “Err” symbol appears, follow the instructions in
the “OMRON connect US/CAN” app.
•Your monitor automatically turns off after 2 minutes.
•Be aware that OMRON will not be responsible for the
loss of data and/or information in the app.
•“OMRON connect US/CAN” is the only app that we
recommend to use with your monitor to transfer data correctly.
4.2 Taking a Measurement
Refer to sub-section 3.1 to start a measurement. Open the app on your
smart device and follow the instructions.
•Make sure that your monitor is within 16 ft. (5 m) of your smart device.
Transferring Data Automatically/Manually
•When Bluetooth is enabled, the readings will be transferred to your smart
device within 1 hour after taking a measurement.
•To transfer the readings manually, press the button.
To Next Page
Loading...
