30
4.3 Disabling/Enabling Bluetooth
•This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT
use this product in locations where RF is restricted, such as on an
aircraft or in hospitals. Turn off the Bluetooth feature in this monitor and
remove batteries when in RF restricted areas. For further information on
potential restrictions refer to documentation on the Bluetooth usage by
the FCC/ISED.
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button for more than 10 seconds.
“oFF” flashes 3 times.
2. Press the [START/STOP] button to turn your monitor off.
•To enable the Bluetooth, press and hold the button for more than
2 seconds. “on” appears on the display.
•Your monitor automatically turns off 2 minutes after the completion.
•When Bluetooth is disabled, the “ ” symbol appears.
To Next Page
Loading...
