32
2. Press the or button repeatedly to scroll through the
previous readings stored in the memory.
: To view the older readings
: To view the more recent readings
5.2 Viewing the Average Reading
Your monitor can calculate an average reading based on the latest 2 or 3
readings taken within the most recent 10 minute timeframe.
•Set your monitor to the correct date and time before taking a
measurement to view the average readings.
1. When your monitor is off, press and hold the
button for more than 2 seconds.
The “ ” symbol flashes.
•If there are only 2 readings in the memory for that
period, the average will be based on these 2
readings.
•If the average reading is high (refer to sub-
section 1.3), the “ ” symbol appears.
To Next Page
Loading...
