4. Taking Only a Blood Pressure Measurement
EN34
4. Remain still and do not talk until the entire measurement process is complete.
1) The “ ” symbol flashes at every heartbeat.
Note
• The “ ” symbol appears if the arm cuff is wrapped around the arm correctly.
• When the “ ” symbol is displayed, the arm cuff is not applied correctly. Press the BP [START/STOP] button to turn your
monitor off, then apply the cuff correctly.
2) After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates.
Your blood pressure and pulse rate are displayed on the monitor.
Note
• If your monitor has not been paired with your smartphone, skip following steps 3) and 4).
3) As soon as your measurement is complete, open the “OMRON connect” app on your smartphone to transfer your
blood pressure readings.
Note
• On the paired smartphone, Bluetooth must be enabled.
• If you need to transfer the blood pressure readings manually, refer to section 6.
4) You can view your blood pressure readings on the app.
5. Remove the arm cuff.
To Next Page
Loading...
