12. Maintenance
EN
EN53
12.3
Cleaning
• Do not use any abrasive or volatile cleaners.
• Use a soft dry cloth or a soft cloth moistened with mild (neutral) detergent to clean your monitor and the arm cuff and then
wipe them with a dry cloth.
• When electrodes are dirty, use a soft cloth or cotton swab moistened with alcohol-based sanitizer to clean the electrodes.
• Do not use alcohol to clean any other parts, and use it only to clean electrodes.
• Do not wash or immerse your monitor and arm cuff or other components in water.
• Do not use gasoline, thinners or similar solvents to clean your monitor and arm cuff or other components.
12.4
Calibration and Service
• The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life.
• It is generally recommended to have the unit inspected every two years to ensure correct functioning and accuracy. Please
consult your authorised OMRON dealer or the OMRON Customer Service at the address given on the packaging or
attached literature.
To Next Page
Loading...
