EN
EN33
4. Taking Only a Blood Pressure Measurement
Note
• You can take a blood pressure measurement without pairing to a smartphone. To pair your monitor with your smartphone, refer to
sub-section 2.2.
• When taking a blood pressure measurement and recording an ECG simultaneously, refer to section 3.
• When recording only an ECG, refer to section 5.
1. Apply the arm cuff. Refer to sub-section 3.1.
2. Sit correctly. Refer to sub-section 3.2.
3. Press the BP [START/STOP] button to take a blood pressure measurement.
All symbols appear on the BP reading display of the monitor before starting. The arm cuff will start inflating in few
seconds.
Note
• To stop a blood pressure measurement, press the BP [START/STOP] button once to deflate the arm cuff.
Caution
• DO NOT use this monitor with other medical electrical (ME) equipment simultaneously. This may result in incorrect operation of the
devices and/or cause inaccurate blood pressure readings and/or ECG recordings.
• Remain still and DO NOT talk while taking a blood pressure measurement.
To Next Page
Loading...
