EN40
7. Taking a Blood Pressure Measurement Manually
If your systolic blood pressure is more than 210 mmHg, take a blood pressure measurement manually.
Prepare for taking a blood pressure measurement by referring to sub-sections 3.1 and 3.2.
And press the BP [START/STOP] button.
After the arm cuff starts to inflate, press and hold the BP [START/STOP] button until the monitor inflates 30 to 40 mmHg
higher than your expected systolic blood pressure.
Press and hold
START
INFLATING
COMPLETED
Press
Release the BP [START/STOP]
button at 30 to 40 mmHg higher
than your expected SYS.
BP reading displayOperation
Note
• Do not inflate above 299 mmHg.
• You can not record an ECG simultaneously when
taking a blood pressure measurement manually.
Caution
• Inflating to a higher pressure than necessary
may result in bruising of the arm where the cuff
is applied.
To Next Page
Loading...
