11. Error Messages and Troubleshooting
EN46
appears
or
a measurement cannot
be complete after the
arm cuff inflates.
You move or talk during a measurement
and the arm cuff does not inflate
sufficiently.
Remain still and do not talk during a blood pressure
measurement. If “E2” appears repeatedly, inflate the arm cuff
manually until the systolic pressure is 30 to 40 mmHg above your
previous blood pressure readings.
Refer to section 7.
Due to the systolic pressure is above
210 mmHg, a measurement cannot be
taken.
appears
The arm cuff is inflated exceeding the
maximum allowable pressure.
Do not touch the arm cuff and/or bend the air tube while taking a
measurement. If inflating the arm cuff manually, refer to section
7.
appears
You move or talk during a measurement.
Vibrations disrupt a measurement.
Remain still and do not talk during a measurement.
BP reading display /
Problem
Possible Cause Solution
To Next Page
Loading...
