To Next PageTo Next PageWhat to do if nothing is displayed on my Omron HJ-005 Pedometer?
If nothing is displayed or the display is weak on your Omron Pedometer, it could be due to the following reasons: * The battery polarities (+ and –) are not aligned properly. Make sure to insert the battery with the correct alignment. * The battery is worn out. Replace it with a new LR43 battery.
Why are the values displayed wrong on my Omron HJ-005?
The values displayed on your Omron Pedometer might be incorrect due to several reasons: * The pedometer may not be attached correctly. Ensure it is properly attached. * You might be walking at an inconsistent pace. Try to maintain a consistent pace while walking and wear proper footwear. * The ADJ. Knob might not be adjusted correctly. Readjust the sensitivity.
General| Display | LCD |
|---|---|
| Step Count | Yes |
| Distance Measurement | Yes |
| Calorie Measurement | Yes |
| Type | Pedometer |
| Measurement Range | 0 to 99, 999 steps |
| Measurement Accuracy | ±5% |
| Water Resistance | No |
Provides essential safety warnings and precautions for using the OMRON Pedometer to prevent injury or damage.
Details the key features and benefits of the OMRON HJ-005 Pedometer, highlighting its user-friendly design.
Explains the correct method for attaching the pedometer to clothing for accurate step counting and secure placement.
Guides users through the initial setup, including removing the insulation film and resetting the device before first use.
Details how to fine-tune the pedometer's sensitivity for precise step counting based on individual walking patterns.
Provides step-by-step instructions for safely replacing the battery to ensure continuous operation of the pedometer.
Offers guidance on proper cleaning, care, and storage conditions to maintain the pedometer's performance and prevent damage.
Lists common issues, their probable causes, and recommended solutions for troubleshooting the OMRON Pedometer.
