TAKING A MEASUREMENT
1. Sit comfortably in a chair with your feet
flat on the floor.
2. Press the START/STOP button.
3. Hold your arm across your chest at heart level.
Hold your elbow firmly to avoid body movement.
Sit still and do not talk or move during
the measurement.
4. Description of position sensor activity during measurement.
Adjust the height of your wrist until the position sensor alarm beeps
slowly. When the monitor senses that your arm is in the correct
position, the wrist cuff will automatically start to inflate and
measurement starts.
NOTE: If your wrist is too low or too high, the position sensor
alarm will emit a series of two short bleeps similar to
a heartbeat.
The current time is displayed and the Heart Symbol starts to flash
while the cuff is inflating.
Hold the monitor at heart level until the measurement is completed.
NOTE: To stop the inflation or measurement, push the
START/STOP button. The monitor will stop inflating, start
deflating, and will turn off.
Blip Blip
14
Blip Blip
Blip Blip
HEM-650-IM-US-8012 12/7/05 10:22 AM Page 14
To Next Page
Loading...
Need help?
General
