Every time you complete a measurement the monitor stores the
blood pressure and pulse rate in the memory. The Blood Pressure
Monitor automatically stores up to 90 measurement values. When 90
sets of measurement values are stored in the memory, the oldest
record is deleted to save the most recent measurement values.
The monitor also calculates an average reading based on the values
of the three most recent measurements taken. If the date and time is
not set, the measurement values will not be stored in the memory
correctly.
TO DISPLAY THE AVERAGE VALUE
1. Press the MEM button. The average value symbol will display
on the screen with the average reading.
USING THE MEMORY FUNCTION
Average Value Symbol
16
HEM-650-IM-US-8012 12/7/05 10:22 AM Page 16
To Next Page
Loading...
Need help?
General
