Specifications
15
Be Sure to Read This Section
Know Your Unit
Preparations before Measurement
How to Measure Blood Pressure
How to Apply the Cuff
4. Align the Artery Position Mark
with the brachial artery.
5. Wrap the cuff snugly using both hands
and securely fasten it with the Velcro™
tape. At this time, the lower edge of
the cuff must be placed 1/2" to 1"
above the inner side of elbow joint.
• If the INDEX is positioned outside the RANGE, select the cuff suitable for the
patient's arm circumference and wrap it again.
• Wrap the cuff so that you can insert only one finger between the cuff and arm.
7. Keep the level of the cuff at the same
level as the heart during the
measurement.
3. Place the hand of the patient with the
palm of hand facing upward.
1/2"-1"
To Next Page
Loading...
