Specifications
27
Be Sure to Read This Section
Know Your Unit
How to Measure Blood Pressure
Preparations before Measurement
How to Clean the Unit after Use
1. Wipe the monitor with a soft, damp cloth diluted with disinfectant alcohol, or
diluted detergent.
2. Complete cleaning by wiping the monitor with a soft, dry cloth.
General advice
• Do not clean this unit with gasoline, paint thinner, or
high concentration alcohol.
• Do not disinfect this unit by autoclave or gas
sterilization (EtO, gluteraldehyde, or high
concentration ozone.)
When cleaning this unit, unplug the AC
adapter from the electric outlet.
After cleaning this unit, dry it well, before
plugging the AC adapter in the electric outlet.
To Next Page
Loading...
