Specifications
21
Be Sure to Read This Section
Know Your Unit
How to Measure Blood Pressure
How to Measure Blood Pressure (in SINGLE Mode)
5. Push the START Button to start the
measurement.
• Do not push the
START Button without
wrapping the cuff.
• If you want to stop
measurement, push
the STOP Button. The
cuff will rapidly deflate.
6. The measurement results are
displayed.
• While the battery pack is in use, the
monitor will turn off automatically after
five minutes of inactivity and the display
(measurement results) will disappear.
(Automatic Power Off)
7. Push the ON/OFF (power) Button to
turn off the power.
If the monitor determines that the pressure value is not correct,
an error display appears (Er1 to 9). In this case, refer to Page 28
and start the measurement again.
Preparations before Measurement
To Next Page
Loading...
