Omron IntelliSense HEM-907 User Manual

Specifications
25
Be Sure to Read This Section
Know Your Unit
How to Measure Blood Pressure
How to Measure Blood Pressure (in MANU Mode)
Preparations before Measurement
5. Place the stethoscope on the
patient's arm.
6. Push the START Button to start the
measurement.
• Do not push the START Button without
wrapping the cuff.
• Do not squeeze or press the cuff during the
measurement.
• If you want to inflate again after the start of
deflation, push the START Button.
• If you want to accelerate deflation after the
start of deflation, push the DEFLATION
(deflation control) / Measurement Results
Display Switch Button. Each time the
Button is pushed, cuff is deflated rapidly in
increments of 5 to 10 mmHg.
9. Push the ON/OFF (power) Button to
turn off the power.
7. Take the readings.
8. Push the STOP Button to remove air
inside the cuff.
• The unit does not automatically deflate in
the MANU Mode.
If the monitor determines that the pressure
value is not correct, an error display appears
(Er1 to 9). In this case, refer to Page 28 and
start the measurement again.

Omron IntelliSense HEM-907 Specifications

General

Measurement Method	Oscillometric
Display	Digital LCD
Automatic Inflation	Yes
Measurement Range (Pressure)	0 to 299 mmHg
Accuracy (Pressure)	±3 mmHg
Accuracy (Pulse)	±5% of reading
Display Type	LCD
Cuff Type	Arm Cuff
Power Source	AC Adapter or 4 AA Batteries
Measurement Range (Pulse)	30 to 199 beats/min
Inflation	Automatic
Deflation	Automatic