26
5.Handling Errors and Problems
Nothing happens
when you press the
buttons.
The batteries are
empty.
Replace the batteries
with new ones.
The batteries have
been inserted
incorrectly.
Insert the batteries with
the correct (+/ -)
polarity.
Other problems.
Press the O/I START button and repeat
measurement.
If the problem continues, try replacing the
batteries with new ones.
If this still does not solve the problem, contact
your OMRON retail outlet or distributor.
Problem Cause Remedy
HEM-7116-E(V)_EN_DE.book Page 26 Monday, June 18, 2012 4:21 PM
To Next Page
Loading...
