Omron M2 Basic User Manual

14
3.Using the Unit
3.2 Applying the Arm Cuff
Be sure to wrap the arm cuff correctly so that you get accurate results.
Measurements can be taken in light clothing. However, please remove
thick clothes, such as sweaters, before taking a reading.
1. Insert the air plug into the air
jack on the left side of the
main unit.
2. Put your left arm through the
cuff loop.
Note: If the cuff is not
assembled, pass the
end of the cuff furthest
from the tubing through
the metal D-ring to form
a loop. The smooth
cloth should be on the
inside of the cuff loop.
HEM-7116-E(V)_EN_DE.book Page 14 Monday, June 18, 2012 4:21 PM

Omron M2 Basic Specifications

General

Model	M2 Basic
Category	Blood Pressure Monitor
Measurement Method	Oscillometric
Cuff Size	22-32 cm
Measurement Range Pressure	0-299 mmHg
Accuracy Pressure	±3 mmHg
Accuracy Pulse	±5% of reading
Power Source	4 x AA batteries
Technology	IntelliSense
Measurement Range Pulse	40-180 beats/min
Weight	Approximately 250g (without batteries)
Display	LCD
Dimensions	103 x 80 x 129 mm