11
2.Preparation
EN
3.
Press the SET button to confirm the setting when the desired
number appears on the display.
The year is set and the month digits flash on the display.
4.
Repeat steps 2 and 3 to set
the month.
The month is set and the day
digits flash on the display.
5.
Repeat steps 2 and 3 to set
the day.
The day is set and the hour
digits flash on the display.
HEM-7051_E_main.book Page 11 Friday, August 29, 2008 11:24 AM
To Next Page
Loading...
