22
3.Using the Monitor
To View Previous Readings Stored in Memory
1. Press the button, while the average reading is displayed,
to view reading stored in memory from the most recent to the
oldest.
2. Press the or button repeatedly to cycle through the
previous measurement values.
( button: from the most recent to the oldest,
button: from the oldest to the most recent)
Keep the button pressed down to cycle rapidly through the pre-
vious values.
To Delete All the Values Stored in Memory
You cannot delete the stored readings partially, all the reading
in the monitor will be deleted.
To delete stored readings, press the memory button and
the O/I START button simultaneously, then all the readings will
be deleted.
Alternating display
HEM-7001-ARU.book Page 22 Thursday, January 8, 2009 9:55 AM
To Next Page
Loading...
