Omron M6 User Manual

21
3.Using the Monitor
EN
3.4 Using the Memory Function
This monitor has a memory capable of storing 90 sets of read-
ings. Every time you complete the measurement, the monitor
automatically stores blood pressure and pulse rate. The moni-
tor also calculates an average reading based on the measure-
ments from the last three readings.
Note: To ensure that the measurement results are recorded
correctly, make sure that the date and time are set cor-
rectly before taking a measurement.
When 90 sets of readings are stored in memory, the old-
est set will be deleted to store a new set.
The date and time of stored readings will be alternately
displayed.
To View the Average Value
Press the memory button.
The average values, based on the last three measurements, is
displayed.
HEM-7001-ARU.book Page 21 Thursday, January 8, 2009 9:55 AM

Omron M6 Specifications

General

Cuff Size	22-42 cm
Display	LCD
Clinically Validated	Yes
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-299 mmHg
Automatic Shut-off	Yes
Cuff Fit Detection	Yes
Category	Blood Pressure Monitor
Memory Capacity	100 Readings
Features	Hypertension Indicator, Irregular Heartbeat Detection
Power Source	4 x AA batteries
Device Type	Upper Arm
Measurement Range (Pulse Rate)	40-180 bpm