Omron NJ501 - 8 Initialization Method; Initializing the Controller

8．Initialization Method
8. Initialization Method
This document explains the setting procedure from the factory default setting.
Some settings may not be applicable as described in this document unless you use the
devices with the factory default setting.
8.1. Initializing the Controller
8.1.1. DeviceNet Unit
To initialize the settings of the DeviceNet Unit, select Edit Special Unit Settings of
CJ1W-DRM21 in CPU/Expansion Racks from the Sysmac Studio.
Select Clears the scan list from the Scan List Clear Switch.
Click the Apply Button and click the Transfer to Controller Button.
43