4-4 Creating Screens
4
4
NP Introduction Manual 75
Creating Screens
The completed screen shows below.
aScreen
b Lamp (N-state)
c Function Switches
●Screen
1. Select [Screen] - [New] from the main menu.
You will see the [New Screen] dialog box.
2. Click [OK].
You will see a new screen in the workspace. [4-Screen_4] will be the title of the
workspace.
3. Click the [Screen Name] input field. Change the value to "04 Stopped".
The title of the workspace will be [4-04 Stopped].
●Lamp (N-State)
Use the lamp to make the display flash.
1. Select [Objects] - [Lamp] - [N-State Lamp] from the main menu. Move the
mouse cursor to the workspace.
The cursor will change shape to [+].
To Next Page
Loading...
