Appendix 1 Specifications
 
 
•  With an Expansion Unit (Video Input Unit or Controller Link Unit) Installed 
  - NS12-V1/-V2, NS10-V1/-V2 
Mounting angle of 0° to less than 30° to the horizontal: 
  Operating temperature range of 0 to 35°C  
Mounting angle of 30° to 90° or less to the horizontal: 
  Operating temperature range of 0 to 50°C  
 - NS8-V1/-V2 
Mounting angle of 0° to less than 30° to the horizontal: 
  Operating temperature range of 0 to 35°C  
Mounting angle of 30° to less than 90° to the horizontal: 
  Operating temperature range of 0 to 45°C  
Mounting angle of 90° to the horizontal: 
  Operating temperature range of 0 to 50°C  
 
 
2.  Operate the PT within the temperature and humidity ranges shown in the following dia-
gram.  
 
  
Display surface
 
30
°
 
Horizontal 0
°
 
90 
° 
  
 
 
 
Wet-bulb temperature (
°
C) 
Storage 
Temperature (
°C) 
Operating 
Humidit
 
RH
 
 
 
 
 
  3.  When a STN LCD display device is used  (NS5-SQ-V1/-V2 or NS5-MQ-V2), the dis-
play quality will decline (e.g., the contrast ratio will be reduced) if the temperature ex-
ceeds 40°C. Also, when the temperature drops, the response speed is lowered due to 
characteristics of liquid crystals.  
 
  4.  May not be applicable in locations with long-term exposure to oil.  
 
 
A-4