Omron NX701-1720 User Manual

• Differences Found in the Device Type
Click the OK
Button or the Close Button.
5 If multiple nodes have been selected and compared, the following message is displayed. Click
theY
es Button.
The comparison results are displayed in order of the selected nodes.
7-2-12
Starting and Stopping Tag Data Links
Automatically Starting Tag Data Links
Tag data links are automatically started immediately after the data link parameters are downloaded
from the Network Configurator
.
(They are automatically started after the CPU Unit's power is turned ON or the Unit is restarted.)
7 Tag Data Link Functions
7-68
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX701-1720 Specifications

General

Brand	Omron
Model	NX701-1720
Category	Controller
Language	English