Omron NX701-1720 User Manual

9-4
Settings Required for the Socket
Services
Make the following settings in the Unit Setup to use the socket services.
Sysmac Studio
Unit Settings T
ab
Page
Setting Setting conditions
Setting Local IP Address Required
Subnet Mask Required
TCP/IP Keep Alive Optional (Change when the default setting of 5 minutes is un-
acceptable.)
Linger Option Optional
Additional Information
Make this setting in the TCP/IP Settings Display
. Refer to 5-1 TCP/IP Settings Display on
page 5-2 for information on the TCP/IP Settings Display.
9 Socket Service
9-11
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
9-4 Settings Required for the Socket Services
9

Omron NX701-1720 Specifications

General

Category	Controller
Manufacturer	Omron
Input Voltage	24 VDC
Power Consumption	50 W
Operating Temperature	0 to 55°C
Shock Resistance	147 m/s², 3 times each in X, Y, and Z directions
Protection Rating	IP20
Weight	Approx. 1.5 kg
Humidity	10% to 90% (non-condensing)