Omron R88M-K Series User Manual

9-5
9-2 Preparing for Operation
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
5. Restart the drive.
Turn OFF the control power supply to the drive and then turn it back ON.
Start absolute encoder clear.
Clearing is finished in an instant.
Note. will be displayed if absolute encoder
clear is performed on an incremental encoder.
Pressing and holding
(for approx. 5 s) increases " ."

Omron R88M-K Series Specifications

General

Brand	Omron
Model	R88M-K Series
Category	Servo Drives
Language	English