Omron S8JX-G Series

S8JX
27
S8JX-G S8JX-P
Common Precautions
Separately purchasable mounting brackets (Please ask your dealer for details of delivery.)
Bracket for changeover from S82J-series
The mounting-hole pitch of mounting brackets A - I below is identical to that of our product S82J. These brackets can be used for
switchover with the S82J-series.
Note: Mounting brackets (A, B, C, D, E, F, G, H, I) are compatible with S82J mounting holes.
For 30-W/50-W/100-W/150-W/300-W/600-W models (separately purchasable)
Models compatible with the
S82J-series
Mounting
Orientation
Products names Model
50-W models
Underside mounting
Mounting bracket A (For S8JX-G-series 50-W models) S82Y-JX05B
100-W 24 V models Mounting bracket B (For S8JX-G-series 100-W 24 V models) S82Y-JX10B
100-W 5 V, 12 V, 150-W 24 V models
Mounting bracket C (For S8JX-G-series 100-W 5 V, 12V, 150 W models) S82Y-JX15B
100-W 5 V, 12 V, 150-W 24 V models Front mounting
Mounting bracket D (For S8JX-G-series 100-W 5 V, 12 V, 150 W models) S82Y-JX15F
25-W models Underside mounting Mounting bracket E (For S8JX-G-series 30-W models) S82Y-JX03B
300-W models
Underside mounting Mounting bracket F (For S8JX-G-series 300-W models) S82Y-JX30B
Front mounting Mounting bracket G (For S8JX-G-series 300-W models) S82Y-JX30F
600-W models
Underside mounting Mounting bracket H (For S8JX-G-series 600-W models) S82Y-JX60B
Front mounting Mounting bracket I (For S8JX-G-series 600-W models) S82Y-JX60F
28
40
3.5
R2
R1.75
R0.5
161
150.5±0.5
6.5
Thickness = 2
3.5 dia.
A
B
B
A
Mounting Bracket A
S82Y-JX05B
Screws used
A: Accessories (2 locations)
Be sure to use the accessory screws.
Mounting screw tightening torque
(recommended): 0.49 N · m
B: M3 (2 locations)
Method of Mounting
28
50
4.5
R2
R2.25
R0.5
170
6.5
4.5 dia.
160±0.5
Thickness = 2
B
A
B
A
Mounting Bracket B
S82Y-JX10B
Screws used
A: Accessories (2 locations)
Be sure to use the accessory screws.
Mounting screw tightening torque
(recommended): 0.49 N · m
B: M4 (2 locations)
Method of Mounting