SRT1-jjD04S
SRT1-jjD04S
69
Attaching or Removing Connector Unit
(SRT1-TKD04S, SR
T1-XKD04S, E3X-NM16)
Attaching Connector Unit
1. Hook Section A of the Connector Unit onto Section B of the
Sensor
Amplifier T
erminal.
2. Push in the Connector Unit until Section C locks inside
Section
D of the Sensor Amplifier T
erminal.
Bottom View
Section A
Section C
Section D
Section A
Section B
Removing Connector Unit
1. While
pushing Section D, pull the Connector Unit in direction
E.
2. When Section D releases from the lock, the Connector Unit
can
be removed.
Push here
Section D
Channel Numbers
Channel numbers 1 to 4 of the E3X-NM16 correspond to contact
numbers
0 to 3 of the SR
T1-TKD04S, and to contact numbers 4 to 7
of
the SR
T1-XKD04S.
To Next Page
Loading...
