65
Appendix D - PLC/Touchscreen Connection Examples
V520-LHA7127
Touchscreen Connections Example
■ Operation
On actuation of a string display on the screen, the
barcode read from BCR will be displayed.
■ V500-LPx5627-P Setup
• Add the STX prefix and ETX suffix to the data by
scanning the codes in the operation manual of
the BCR.
• Set to “DISABLE” the trigger function and
“MULTIPLE READ.”
■ NS/NT Setup
• Verify that they communications parameters
match the BCR:
9600 bps
7 data bits
2 stop bits
EVEN parity
• Create a screen with a “string display” on it and
set its attributes to the bar code input.
1NT or NS
2 Barcode reader
To Next Page
Loading...
