10
BATTERY INSTALLATION
Operating Instructions
1. Remove the Screw on the Battery Cover
located on the back of the main unit.
Use the supplied screwdriver or use
a commercially available small screwdriver
to remove the screw on the battery cover.
2. Open the Battery Cover.
3. Insert the battery.
Place the positive (+) side of the battery
(CR2032) upward. Insert the battery in the
direction of the arrow as illustrated.
4. Replace the Battery Cover.
Insert the projected portion of the
battery cover as illustrated.
Tighten the screw on the Battery Cover.
NOTES:
• After installing the battery, set the time of
day, weight and stride length.
• Remove the protective film from the face
of the display.
To Next Page
Loading...
