19
USING THE MEMORY FUNCTION
This unit can store up to seven days of data for the number of steps,
number of aerobic steps, calories and distance. The data is stored
starting with the oldest day.
The current day data is automatically stored in memory when the time
reaches 12:00AM. The display will return to 0. You do not need to
press the RESET Button everyday.
NOTE: The time must be correctly set in the unit.
How to view data stored in the memory
Press the MODE Button until the data you
want to see is displayed:
Steps
Aerobic steps with minutes
Calories with amount of fat burned
Distance
Press the MEMORY Button. The previous day
data is displayed.
Continue to press the MEMO/▲ Button until all
seven days of stored data is displayed.
NOTE:
The time is not displayed when
using the memory function. If no button
is pressed for more than 1 minute, the
display will return to the current day data.
Press the MODE Button to return to the
current day’s data.
19
To Next Page
Loading...
