20
USING THE SYSTEM RESET FUNCTION
Use the SYSTEM RESET function in the following cases:
• When the battery is replaced
• When you want to delete the memory
• When the display becomes unrecognizable
1. Press the SYSTEM RESET Button on the
back of the main unit with a thin stick that
is not easily breakable.
All the data stored in the memory and the set
data (time, weight, and stride length) are
deleted.
2. Set the time, weight, and stride
length again.
After all characters on the display are turned on,
the initial time setting display appears.
(Refer to Setting the Time on page 12)
To Next Page
Loading...
