Omron YSC-8361 - Appendix; Machine ID; Table of maximum speeds

15
1.3 Hot Keys
1.4 Motor encoder
1.5 Output Device
Press to test.
Trimmer:
Foot Lifter:
Thread tension:
Thread clamp:
Addition thread tension:
Reverse:
Stitch length:
Stroke:
1.6 Input Switches
Display C：Reverse switch
Display E：Safety Switch
Display G：Knee Stroke Switch
1.7 Electronic Handwheel
Display B：Rotation
Display C：Press Switch
Display DEFG：Encoder
1.8 Speed Limit Device to stroke
Digital Type：
Analog Type：
1.9 AC voltage
1.10 Bus voltage
1.11 Software Version
1.12Hardware Version
1.13 Software Release Date
2. Appendix
2.1 Machine ID
2.1.1 How to change the machine ID
Press hold 『A+』key and turn on the power to access to adjust the
machine ID, seven-segment displays F,G will display the ID, change it
and press to save.
2.1.2 Table of maximum speeds
Machine ID
Unit(sti/min)
1
20665 Direct-drive
2000
2
20665 Belt-drive
2000
3
TW1-899-D2T3
2500
4
TW1-898D3T3
2500
5
TW1-999-D2T3
2500
6