Omron YSC-8361 - Disable the safety switch

9
7.6 Disable the safety switch
If you want to disable the function of Safe SW., you can change the value of
“O31” from “1” to “0” normally, in a particular case, for example, the Safe SW. broke
down, you can power on while press “C+” key to disable the function of Safe SW.
warning ： it means potential security problems for you if you disable the function of Safe
SW., so attention please.
7.7 Parameter list
SN
PARAMETER
RANGE
DESCRIPTION
S Type Para
S01
Max Speed
500 ～
3000spm
Unit: stitch/min
S02
Min Speed
150 ～
500spm
Unit: stitch/min
S03
Start tacking speed
500 ～
2000spm
Speed adjustment for
start tacking
S04
End tacking speed
500 ～
2000spm
Speed adjustment for end
tacking
S05
Bar-tacking speed
500 ～
2000spm
Speed adjustment for
bar-Tacking
S06
C-S sewing speed
500 ～
2000spm
Speed adjustment for
constant-stitch sewing
S07
Trimming speed
150 ～
300spm
Speed adjustment for
trimming
S08
Soft start speed
200 ～
500spm
Soft start speed
S09
Speed limit for stroke
height level 1
500 ～
4000spm
S10
Speed limit for stroke
height level 2
500 ～
4000spm
S11
Speed limit for stroke
height level 3
5004 ～
000spm
S12
Speed limit for stroke
height level 4
500 ～
4000spm
T Type Para
T01
RVS action time
1～200（ms）
Action time of the REV
SOL.
T02
RVS release time
1～200（ms）
Release time of the REV
SOL.
T05
Foot lifter delay time
setting
1～500（ms）
Foot lifter Delay time
adjustment for pedal’s
feet lift position
T06
Running-Delay time
setting
1～500（ms）
Running delay time
adjustment for Automatic
Foot Lifter