Omron ZEN - Page 31

7 Programming Functions ZEN Programmable Logic Module
OMRON ELECTRONICS, S.A. Page 31
7.6. Comparing Timer/Counter Present Values Using Comparators (P)
Timer (T), holding timer (#) and counter (C) present values can be compared.
Present values of the same type of timers or counters can be compared. They
can also be compared with constants.
7.6.1. Settings in the Ladder Program
The comparator inputs are written in the ladder program edit screen. The
settings are carried out in the parameter settings screen.
No. of comparators P0 to P5
• Example 1
When the holding timer #0 ≥ 12 min 34 s
• Example 2
When counter 1 (C1) ≤ counter 2 (C2)
Associated bit
Output as
result of the
operation