FUN (Function) Mode Section 4-5
129
Confirming the Numeric Value
The flashing set value must be confirmed to be stored. The numeric value
is confirmed using the following method.
When you finish adjusting the numeric
value, press the ENT Key to confirm the
value.
All digits will flash twice.
The display will light continu-
ously after flashing twice.
Press the ENT Key.
The numeric value will be stored in
EEPROM after the display flashes twice
and then lights continuously.
Z157-E1-01C.book Page 129 Thursday, August 31, 2006 5:13 PM
To Next Page
Loading...
