EasyManua.ls Logo

Omron ZX - Calculating Unit

Omron ZX
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 ZX Series (ZX-L-N) Smart Sensors (Laser Type)
Calculating Unit
ZX-series Communications Interface Unit
* Contact your OMRON representative for CompoWay/F communications specifications.
Item ZX-CAL2
Applicable Amplifier Units ZX-LDA11-N/41-N/ZX-EDA11/41/ZX-TDA11/41
Current consumption 12 mA max. (supplied from the Smart Sensor Amplifier Unit)
Ambient temperature Operating: 0 to 50
°C, Storage: 15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Connection method Connector
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Insulation resistance 100 M
(at 500 VDC)
Vibration resistance (destructive) 10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destructive) 300 m/s
2
3 times each in six directions (up/down, left/right, forward/backward)
Materials Display: Acrylic, Case: ABS resin
Weight (packed state) Approx. 50 g
Item ZX-SF11
Current consumption 60 mA max. (supplied by the Amplifier Unit)
Applicable Amplifier Units ZX Series
Applicable Amplifier Unit versions ZX-LDA@1-N Ver. 1.000 or higher
ZX-EDA@1 Ver. 1.100 or higher
ZX-TDA@1 Ver. 1.000 or higher
Max. No. of Amplifier Units 5
Communications
functions
Communications
port
RS-232C port (9-pin D-Sub Connector)
Communications
protocol
CompoWay/F*
Baud rate 38,400 bps
Data configuration Data bits: 8, Parity: none, Start bits: 1, Stop bits: 1, Flow control: none
Indicators Power supply: green, Sensor communications: green, Sensor communications error: red, External
terminal communications: green, External terminal communications error: red
Protective circuits Reverse polarity protection
Ambient temperature Operating: 0 to 50
°C, storage: 15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Insulation resistance 20 M
min. (at 500 VDC)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max.
Materials Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories Instruction sheet, 2 clamps

Related product manuals