Omron ZX2 - Page 14

ZX2
14
(32)
22.6
*
1
The measurement distance reference position is
the Sensor’s sensing surface.
*
1
Mounting Bracket
Nut plate
Phillips screws
Installation Method for Diffuse-reflective Sensor Heads
Using a E39-L178, E39-L179 Mounting Bracket:
Note: When securing the Sensor Head in the
Mounting Bracket, insert the screws
into the side of the Sensor Head where
the warning label is located and secure
the Sensor Head into place.
workpiece
*
ZX2-LD50 (L): 50
ZX2-LD100
(L): 100
Measurement
center distance
39.5±0.05
4.0
±0.05
31.5
±0.05
L*
Not Using a Mounting Bracket:
Mount the Sensor Head in relation to the workpiece as shown below.
Для заказов: +7(499)707-11-20,
Email: i@sp-t.ru
8-800-511-65-88(Бесплатно по РФ)