Thank you for choosing the OMTech Polar 350 as your new laser engraver!
Your CO₂ laser engraving machine is intended for personal and professional use. When used in
accordance with these instructions, the Polar is a Class 1 laser system but some components remain
extremely dangerous. Never disable the preinstalled safety devices and always use your laser safely and
responsibly.
Read this manual carefully before operation. It covers the details of correct installation, adjustment,
maintenance, and—most importantly—safe operation of your new laser. It is intended to be used in
conjunction with your engraving software manual, as the software not only provides image design and
conversion but also serves as the main interface to the laser settings and machine controls. You and any
other users of this device should thoroughly understand BOTH manuals before attempting to operate the
laser.
Keep both manuals for future reference and provide them to ANYONE who will install, operate, maintain,
or repair this machine. Both manuals should be included if this device is given or sold to a third party.
If you have any questions after reading these manuals, please contact us and our support department
will address your concerns as soon as possible.
PREFACE
To Next Page
Loading...
Need help?
General
