2
These items present a risk of serious property damage or personal injury.
These items address similarly serious concerns regarding the laser beam.
These items address similarly serious concerns regarding electricity.
These items address similarly serious concerns regarding fire hazards.
Protective eyewear should be worn by anyone nearby during use.
Nearby objects present a risk of pinching or crushing injury.
This product is sold in conformity with applicable EU regulations.
Safe and legal disposal of this product requires special considerations.
The following symbols are used on this machine’s labeling or in this manual:
The Polar 350 is intended for use engraving signs and other consumer products on applicable substrates.
This laser can process a wide variety of materials including wood and cork, paper and cardboard, most
plastics, glass, cloth and leather, and stone. It can also be used with some specially coated metals. Use of
this system for non-designated purposes or materials is not permitted.
The system must be operated, maintained, and repaired by personnel familiar with the field of use and the
dangers of the machine and the material being engraved including its reflectivity, conductivity, potential
for creating harmful or combustible fumes, etc.
Laser beams are dangerous. The manufacturer and/or seller bear(s) no responsibility and assume(s)
no liability for any improper use of this device or for any damage or injury arising from such use. The
operator is obliged to use this desktop laser engraver only in accordance with its designated use, the other
instructions in its manuals, and all applicable local and national laws and regulations.
1.2 Symbol Guide
1.3 Designated Use
To Next Page
Loading...
Need help?
General
