What to do if On Call Plus shows damaged code chip?
If the code chip is damaged, use a new code chip with the correct code number and run the test. If the chip is removed during a test, confirm the code chip matches the test strip code and repeat the test.
What to do if On Call Measuring Instruments has no code chip?
Insert the code chip that came with the box of test strips.
What to do if On Call Plus Measuring Instruments battery has discharged?
Replace the battery and repeat the test.
What to do if On Call Measuring Instruments battery is discharged but has enough power?
Test results will still be accurate, but replace the battery as soon as possible.
What to do if On Call Plus has meter electronics failure?
If the problem persists, contact customer support.
Guide on how to code the meter using the code chip for accurate blood glucose readings.
Instructions on how to obtain a blood sample using the lancing device for testing.
Specific steps for obtaining blood samples from fingertips for glucose measurement.
Steps on how to perform the actual blood glucose test with the meter and test strip.
General| Sample Type | Whole blood |
|---|---|
| Measuring Range | 0.6 - 33.3 mmol/L |
| Battery Life | Approximately 1, 000 tests |
| Operating Humidity | 10 - 90% relative humidity |
| Hematocrit Range | 30 - 55% |
| Measurement Range | 0.6 - 33.3 mmol/L |
| Storage Temperature | -20°C - 60°C |
To Next Page