Chapter 3: Wireless Network Performance | 28
3. Wireless Network Performance
3
This chapter explains how to maximize the performance of your micro USB adapter within your
network.
Optimizing Wireless Performance
The position of your micro USB adapter and the local environment can affect its wireless
performance.
• Use the plastic cradle that came in the package with your adapter. This lets you place the
adapter in a better position for wireless communication.
• Make sure you do not have interference from other wireless equipment, especially those
in the 2400–2500 MHz frequency band. Common sources of interference are:
- Other computers and fax machines (no closer than 1 foot)
- Copying machines, elevators, and cell phones (no closer than 6 feet)
- Microwave ovens (no closer than 10 feet)
How the wireless router or access point is set up also affects wireless communication. For
best performance, try the following:
• For better throughput and a higher link rate, set your router or access point wireless mode
to Up to 150 Mbps or HT 20/40 Mbps.
• For a faster connection, set the security for the router as WPA2 or WPA + WPA2 mixed
wireless security instead of WPA (TKIP). Wi-Fi regulations allow only the adapter to
connect at up to 54 Mbps when WPA (TKIP) security mode is set on the router.
• Avoid using the same wireless channel as your neighbor. To find out which channels are
in use in your area, select the Smart Wizard Networks tab. It lists wireless networks in
your area including the channel used by each.
To Next Page
Loading...
Need help?
General
