on networks N300MA User Manual

10 | Chapter 1: Getting Started
N300 Micro USB WiFi Adapter N300MA
2. Click Next. The Smart Wizard software detects the adapter.
3. Follow the onscreen prompts to install the driver and complete the installation.
How you connect to a network depends on what you selected during custom installation.
• If you installed the Smart Wizard with automatic configuration, see the following
section, Using the Smart Wizard to Connect to a Wireless Network.”
• If you installed the Smart Wizard with manual configuration, the Settings tab displays.
See Viewing Wireless Networks in Your Area on page 17.
• To use a Windows utility, see your Windows documentation or the On Networks
application note at http://documentation.On
Networks.com/reference/enu/winzerocfg/index.htm.
Using the Smart Wizard to Connect to a Wireless Network
After the software is installed, you are prompted to connect to a wireless network.
1. One of the following screens displays:
WPS network
No WPS networks
• WPS network: A network in your area supports Push 'N' Connect (also called WPS).
Click Next, and follow the prompts to push the WPS button on your adapter and on
your router. Then connect without entering a password.
• No WPS networks: Select a wireless network from the list and click Next. To connect
to a secure network, you must enter its passphrase or network key.

on networks N300MA Specifications

General

Brand	on networks
Model	N300MA
Category	Modem
Language	English