REF.
PART
QTY.
PART
REF.
PART
QTY.
PART
NO.
NO.
USED
DESCRIPTION
NO.
NO.
USED
DESCRIPTION
36 813-0110
4 Screw (10-32 x 2"), Round
50 800-0091
4
Screw (1/2-13 x
1-1/4")
-
Head - Heat Sink Mounting
Generator Support to Chassis
37 526-0140 4 Washer (#10) 51 850-0060 4
Washer (1/2"), Lock
38 332-0050
2
Clip,
Wire
52
402-0030
2
Mount, Vibration
39 508-0124 4
Bushing,
Insulating 53
800-0520
2-
Screw (3/4-10 x 1") -
40 508-0156 4 Washer, Insulating
Vibration Mount to Stator
41
850-0030
4 Washer (#10)
Assembly
42 . 87,0-0053 4 Nut (10-32) - Heat Sink 54 800-0071 4 Screw (7/16-14 x 1") -
Mounting
Generator Support to
43 220-2353
1 Stator Assembly, Wound -
Vibration Mount
Exciter - 55
850-0055
.4
Washer (7/16"), Lock
44
232-2102
. 1 • Spacer, Bearing 56 231-0188 1
Adapter, Generator
45 515-0145'
1 • Key, Exciter Rotor 57 802-0072 12
Screw (3/8-16 x 1"), .
46
800-0051.
8 Screw (3/8-16 x
1-1/4")
- Socket Head - Generator
Stator Assembly to Generator
Adapter to Engine
Adapter 58 850-0050 12
Washer (3/8"), Lock
47 850-0050 8 Washer (3/8"), Lock
48
812-0146
4 . Screw (1/4-20 x 3/8"),
* _
Refer to factory giving complete Model, Spec and
Round Head. - Air Inlet
Serial Number from the Onan Nameplate:
Grille Mounting
• -
Included in Wound Rotor Assembly.
49 850-0040 4 Washer (1/4"), Lock
37
To Next Page
Loading...
