MANTA USER’S MANUAL
11
04
uSe and conFiguration oF the equiPMent
3. Make sure the four pins are not visible and be
aware of the positioning while inserting it. Only
one way is possible according to its geometry.
4. Once the Battery is inserted in the board, insert
the four pins to lock the Battery. If the pins do not
enter easily, please, press down on the battery so
the watertight seal is suciently compressed.
5. Close the vent completely, turning it clock wise to assure water tightness.
6. In order to ease the extraction of the battery, turn the vent one full round
counter-clock wise. Pull from the upper handle perpendicularly to extract
the battery.
7. Keep the vent always closed in any other moment and do not turn
it more than three full turns.
mANTA
To Next Page
Loading...
