Physical Specs
Sensor material:
316 stainless steel
Enclosure:
NEMA 4X, aluminum, dual ¾” FNPT conduit entries
Flow Meter Installation for Insertion Meters:
ONICON-supplied process adapter fitting connects to ONICON or customer-supplied
1” ball valve, nipple, and weldolet assembly.
Agency Approvals
CE Mark
EMC Directive; 2014/30/EU
Emissions and Immunity Testing: EN61326-1:2013
FM (USA) and FMc (Canada): Approved
Class I, Division 1, Groups B,C,D;
Class II, Division 1, Groups E,F,G;
Class III, Division 1; T4, Ta = - 40˚C to 70˚C;
Class 1, Zone 1, AEx/Ex db IIB + H2 T4; Gb Ta= -40˚C to 70˚C;
Type 4X, IP66/67
11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com
F-5500 Thermal Mass Flow Meter Manual 06/17 - 2030 / 107023 Page 88
Model F-5500
APPENDICES
www.onicon.com
Physical Specs
Appendices: Specifications
Agency
Approvals
To Next Page
Loading...