Start Up Sequence
The meter automatically enters the Run/Measure mode after power up. The screen will
show the software version of the F-5500 during power up.
USB Interface
The mini USB interface is a standard feature which allows communication with a
PC to monitor readings and configure settings. F-5000 View, is a free application
program from ONICON that connects to the USB interface and allows data monitoring,
configuration setting, data logging to Excel, and an option to save and recall F-5500
configuration data.
F-5500 Display and User Interface
The F-5500 has a 2 line x 16 character display with 4 mechanical buttons. The meter
can be programmed by using the display and User Interface. The User Interface can
be accessed by removing the F-5500 cap. Be sure to replace the cap after you are
done configuring the F-5500.
Fig. 4.1: F-5500 Display and User Interface
Display Screen
Mechanical (Push) Buttons
F2 F3
FLOW
AND
ENERGY
MEASUREMENT
11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com
F-5500 Thermal Mass Flow Meter Manual 06/17 - 2030 / 107023 Page 39
Model F-5500
OPERATION
Model F-5500
OPERATION
Operation: Start Up
Start Up
Sequence
F-5500 Display
USB Interface
To Next Page
Loading...